Reliable Fortinet NSE6_EDR_AD-7.0 Online Practice Test Engine

Wiki Article

If you are on the bus, you can choose the APP version of NSE6_EDR_AD-7.0 training engine. On one hand, after being used for the first time in a network environment, you can use it in any environment. The APP version of NSE6_EDR_AD-7.0 Study Materials can save you traffic. And on the other hand, the APP version of NSE6_EDR_AD-7.0 exam questions can be applied to all kinds of electronic devices, so that you can practice on the IPAD or phone.

The ActualVCE is offering real and updated Fortinet NSE6_EDR_AD-7.0 practice test questions. Very easy to use and perfectly assist you in Fortinet NSE6_EDR_AD-7.0 exam preparation. Fortinet NSE6_EDR_AD-7.0 Exams and will give you real-time Fortinet NSE6_EDR_AD-7.0 exam preparation environment all the time.

>> Latest Real NSE6_EDR_AD-7.0 Exam <<

Pass Fortinet NSE6_EDR_AD-7.0 Exam, Instant NSE6_EDR_AD-7.0 Discount

If people buy and use the NSE6_EDR_AD-7.0 study materials with bad quality to prepare for their exams, it must do more harm than good for their exams, thus it can be seen that the good and suitable NSE6_EDR_AD-7.0 study materials is so important for people’ exam that people have to pay more attention to the study materials. In order to help people pass the exam and gain the certification, we are glad to the NSE6_EDR_AD-7.0 Study Materials from our company for you.

Fortinet NSE 6 - FortiEDR 7.0 Administrator Sample Questions (Q19-Q24):

NEW QUESTION # 19
Refer to the Exhibit:

Based on the FortiEDR status output shown in the exhibit, what are two reasons for the degraded state?
(Choose two answers)

Answer: B,D

Explanation:
The correct answers are B and C .
The exhibit shows:
FortiEDR Service: Up
FortiEDR Driver: Up
FortiEDR Status: Degraded (no configuration)
This means the local Collector service and driver are running, but the Collector has not received valid configuration. In FortiEDR, a Collector must register and communicate with the FortiEDR Aggregator to receive its configuration. The guide states that the Collector initially sends registration information to the FortiEDR Aggregator using SSL, sends ongoing health/status/security-event information, and receives its configuration from the Aggregator.
During installation, a non-customized Windows Collector requires the correct Aggregator address , Aggregator port 8081 , and registration password . The guide explicitly states that the Aggregator port should be specified as 8081 , and that the registration password must be entered during installation.
Therefore, an incorrect registration password or incorrect port number can prevent proper registration
/configuration retrieval, resulting in a degraded/no-configuration state.
Option A is not the best answer because Windows Firewall being enabled by itself does not automatically cause this FortiEDR status; only if it blocks required FortiEDR communication would it matter, and the option is too generic. Option D is also not correct as written because the Collector receives configuration from the Aggregator , not directly from the Central Manager. The guide describes Collector-to-Aggregator communication for registration and configuration.
=========


NEW QUESTION # 20
You are asked to configure a query to run every 15 minutes, automatically searching for specific registry modifications across all endpoints. Which FortiEDR feature must you configure? (Choose one answer)

Answer: A

Explanation:
The correct answer is C.
The FortiEDR guide explains that Threat Hunting searches across endpoint activity events, including registry activity. It states that Threat Hunting can search based on attributes of files, registry keys and values, network, processes, event log, and activity event types. This fits the requirement to search for specific registry modifications across endpoints.
The guide also explains that after filtering activity events, the query can be saved and defined as a Scheduled Query. It says: "Scheduled Query: Mark this option to automate the process of detecting threats so that this query is run automatically according to the schedule that you define." It also states that a security event is automatically created in the Incidents tab when matches are detected, and notifications can be sent through email, Syslog, and other configured methods.
The guide further states that the Repeat Every/On options define the frequency and schedule when the query runs. Therefore, a 15-minute recurring query is handled through the Scheduled Query capability in Threat Hunting, not Communication Control, policy override, or a manual Playbook trigger.
Strictly speaking, the guide calls this a scheduled query under Threat Hunting saved queries, not a
"communication control rule" or "manual query." Option C is the intended answer.
=========


NEW QUESTION # 21
Refer to the Exhibit:

Based on the event shown in the exhibit, which two statements about the event are true? (Choose two answers)

Answer: B,D

Explanation:
The correct answers are A and B .
The exhibit shows the event classification as Malicious , classified by FortinetCloudServices , and the history states that device R2D2-kvm63 was moved from the Training Collector Group to the High Security Collector Group . This is a Playbook action. The FortiEDR guide explains that after classification changes, the Overview pane displays the history of automatic FortiEDR actions, including Playbook policy-related actions .
The guide specifically lists Move device to High Security Group under Investigation actions in Playbook policies. It states that a checkmark in a classification column means the device is automatically moved to the High Security Collector Group when a security event with that classification is triggered. So the exhibit proves that Playbooks are configured for this event.
The second correct answer is B because the triggered rule is under Training * Extended Detection . The FortiEDR guide states that the eXtended Detection Policy logs events and displays them in the Incidents tab, but no blocking options are provided for this policy.
Option C is wrong because moving a device to the High Security Collector Group is not the same as isolating the device. Isolation would block communication to/from the affected Collector. The exhibit shows a Collector Group move, not isolation.
Option D is wrong because Extended Detection does not block. The guide explicitly says Extended Detection events are logged and displayed, with no blocking options provided.
=========


NEW QUESTION # 22
Refer to the exhibits.

What happens when the net user command runs on an endpoint? (Choose one answer)

Answer: B

Explanation:
The correct answer is C .
The exhibit shows a Threat Hunting saved query named CLI Command with the query:
Target.Process.Filename ( " net.exe " )
It is configured as a Scheduled Query , classified as Suspicious , and set to repeat every 15 minutes . The FortiEDR guide states that saving a Threat Hunting query allows it to be defined as a scheduled query to automate threat detection. When the scheduled query runs and detects matching activity, a security event is automatically created in the Incidents tab .
The guide also states that scheduled queries run automatically according to the configured schedule, and each time a match is detected, FortiEDR generates a security event in the Incidents tab and sends notifications according to the security event configuration.
So, when the endpoint runs:
net user edruser password! /ADD
FortiEDR records the relevant process activity, and when the scheduled query runs, it matches the target process net.exe and creates an incident/security event. It is not immediate by default because the query is scheduled every 15 minutes. It also does not block CLI commands by default unless playbook actions or policy controls are configured. The activity is treated according to the saved query classification, which in the exhibit is Suspicious .
=========


NEW QUESTION # 23
Refer to the exhibit:

You configured an execution prevention exclusion with both File Name = app.exe and Path = C:Tools. What will FortiEDR do? (Choose one answer)

Answer: B

Explanation:
The correct answer is B. Exclude only app.exe when it is running from C:Tools.
The FortiEDR 7.0.0 Administration Guide explains that the Exclusion Manager is used to define which processes, files, or domains are excluded from Security Policies monitoring. For Process Exclusions, FortiEDR does not inspect actions performed by specific processes, and those processes are identified by the attributes defined by the administrator.
The guide further explains that process/source attributes can include File Name, Path, Hash, and Signer. It also states that when an exclusion contains multiple conditions, an AND relationship exists between the conditions. If an OR relationship is required, a separate exclusion must be created.
In this exhibit, both conditions are selected:
File Name = app.exe
Path = C:Tools
Because FortiEDR applies an AND relationship between multiple exclusion conditions, the exclusion applies only when both conditions match. Therefore, FortiEDR excludes app.exe only when it is located/running from C:Tools.
Option A is wrong because no Signer condition is selected. Option C is wrong because that would apply if only the file name were used broadly. Option D is wrong because FortiEDR is not excluding every file in C:
Tools; it is excluding the process that matches both the file name and path conditions.


NEW QUESTION # 24
......

For successful preparation, you can also rely on Understanding Fortinet NSE 6 - FortiEDR 7.0 Administrator NSE6_EDR_AD-7.0 real questions. Visit For More Information: Three Formats of Fortinet NSE6_EDR_AD-7.0 Updated Practice Material. The Fortinet NSE6_EDR_AD-7.0 practice test is available in three compatible and user-friendly formats. These formats are NSE6_EDR_AD-7.0 desktop practice test software, Fortinet NSE6_EDR_AD-7.0 web-based practice exam, and Fortinet NSE6_EDR_AD-7.0 PDF dumps file. All three formats of Fortinet NSE6_EDR_AD-7.0 study material contain actual and verified Understanding Fortinet NSE 6 - FortiEDR 7.0 Administrator NSE6_EDR_AD-7.0 exam dumps that will help you boost your exam preparation.

Pass NSE6_EDR_AD-7.0 Exam: https://www.actualvce.com/Fortinet/NSE6_EDR_AD-7.0-valid-vce-dumps.html

That helps our candidates successfully pass NSE6_EDR_AD-7.0 exam test, You can train yourself at your home for the NSE6_EDR_AD-7.0 test by using the NSE6_EDR_AD-7.0 from ActualVCE class room and the NSE6_EDR_AD-7.0 from ActualVCE online test brain dump, Generally speaking, NSE6_EDR_AD-7.0 certification has become one of the most authoritative voices speaking to us today, A high efficiency will be possible by saving your time & energy with the help of Pass NSE6_EDR_AD-7.0 Exam - Fortinet NSE 6 - FortiEDR 7.0 Administrator exam simulators.

ActualVCE resolves your issue and provides you with an updated and actual Fortinet NSE6_EDR_AD-7.0 Practice Test, Flooding Unknown Unicast and Broadcast Frames, That helps our candidates successfully Pass NSE6_EDR_AD-7.0 Exam test.

NSE6_EDR_AD-7.0 Exam tool - NSE6_EDR_AD-7.0 Test Torrent & Fortinet NSE 6 - FortiEDR 7.0 Administrator study materials

You can train yourself at your home for the NSE6_EDR_AD-7.0 test by using the NSE6_EDR_AD-7.0 from ActualVCE class room and the NSE6_EDR_AD-7.0 from ActualVCE online test brain dump.

Generally speaking, NSE6_EDR_AD-7.0 certification has become one of the most authoritative voices speaking to us today, A high efficiency will be possible by saving your time & energy with the help of Fortinet NSE 6 - FortiEDR 7.0 Administrator exam simulators.

Before you buy it, you can do NSE6_EDR_AD-7.0 PDF training by the free demo.

Report this wiki page